Powerful toolbar in Lightroom for sorting all of your photographs.

Can you guess what that would be? When Lightroom was designed in the initial stages, it was not meant for image developing, though it does the developing part now far better than necessary for a photographer. It is meant for the Image management, which is the library part kept in mind while developing. Now I hope you got a close guess in finding out the most powerful toolbar in Lightroom. The toolbar in the library module, which can be made visible by pressing “T”, pressing again will make it hidden and vice versa. Let’s look into this toolbar in detail in this post.

Powerful toolbar in Lightroom-1 Grid viewImage – 1: The above view is the complete appearance of the toolbar from Library module in grid view.

The main purpose of this toolbar is to help you organize your 10’s of 1000’s of images and it does the job well. If you know the tools, you will be in a better position to make use of it. The first tool from leftmost is the grid view tool; you can also press ‘G’ to enable this grid tool(this is the default view of Library module). This tool is nothing but to see all your images in that particular folder or collection or for that matter a whole year’s folders or your complete catalog even.

Loupe view(E)

To view/inspect one image at once, pressing “E” will make the selected photograph to occupy the workspace. From here, you can rate your image, sort based on colour, flagging.  The key difference here is once you go to the Loupe view, the painter tool will go off (you don’t need it in Loupe view) and Zoom & Grid tool starts appearing in the same tool bar. Zoom tool is to view your image in 1:1 ratio or you can set the amount of zoom. Grid tool will enable you to activate grid overlay on your image, with the help of grid overlay you can inspect the horizon or verticality of the image closely.

Powerful Toolbar in Lightroom Loupe view-2

Image -2: The above is the complete appearance of the toolbar from Library module in loupe view.

Tip: Pressing enter from grid view will take the most selected image to Loupe view, pressing esc from Loupe view will take you back to grid view.

Compare tool (C)

After selecting any two images from gridview and hit “C” will enable this tool putting both the images in side by side in order to compare as the name goes. The most selected image (select Image) on your left and the next image (Candidate image) on the right side by side. Both the photographs will be displayed with their star, flag and colour ratings if any, you have applied earlier. Clicking the cross mark on the bottom of the image will deselect the photograph respectively.

Pressing the lock symbol on the toolbar will lock the zoom function, so both the photograph can be zoomed equally at once. If you have zoomed in the image independently, press the sync button to bring back the other image to tandem. Pressing the XY button will swap the Candidate and select images.  Clicking the next XY button will make the Candidate image become Select image.

Powerful Toolbar in Lightroom Survey view-3

Image-3: Screenshot of compare view

The arrow marks will navigate through the folder or collections which you have selected. The Select stays the same and the candidate image changes. Clicking done will take you to the Loupe view with select image.

Tip: Selecting more than two images before pressing “C” will enable you to compare two at a time within the selected images.

Survey Tool(N)

The next tool in the main toolbar is Survey tool. To compare more than 2 images on a single window, survey tool will help. The most selected image will have a white border; you can apply the ratings, flag status, colour ratings. This tool will help in selecting that one particular shot from the range of shots made in burst mode while shooting.

Powerful toolbar in Lightroom-Survey view-4

Image – 4: Screenshot of Survey tool

As you press the left and right arrow marks, the selection will go through only with the selected images in grid view, not with the whole selected folder/collection. The selected image will display a cross mark on the right bottom. If you click that, it will remove that particular image from the survey mode.

Note: The difference between Compare and Survey tool is, Compare tool will let you compare only two images at a time, but in survey mode you can compare many images at once.

Tip: Press tab to hide both the right and left side panels to provide more workspace.

Painter tool (Ctrl+Alt+K)

The painter tool is the one which looks like a paint can, the fifth tool displayed in the toolbar. This is one of the very helpful tools in classifying your photographs. The purpose of this tool is to apply specifically to particular images a Keyword, Label, Flag, Rating, Metadata, Settings, Rotation, Target collection (attributes).

The most Powerful toolbar in Lightroom-Painter tool-5

Image-5a: The painter tool between the survey sign and sort order (encircled in red)

The most powerful toolbar in Lightroom-Painter tool

Image-5b: Once you click the painter tool the cursor will change into a spray paint can and you have to spray the parameters (click) you have selected onto the images you wish.

Once the painter tool is activated, the cursor will turn into a spray paint can and you can apply any one of the 8 attributes at a time displayed in the screenshot below.

Adobe Photoshop Lightroom - Library Painter options

Image-6: Painter tool options

If you decided to apply a keyword (e.g. – Monochrome) to few of the photographs/collection, you can do so by typing the text on the field which will appear immediately you select “keywords” from the drop-down menu next to the painter tool. After that, you only need to click on the thumbnails of the photographs which need the keyword to be applied. By the very same way, you can apply Colour label, Flag status, Star ratings, Metadata, Settings, Rotation and target collection.

Sort order

The sort order tool will help you make a visual search of a particular photo from the folder/collection based on the name, edited time, added order etc. as displayed in the screenshot below.

Lightroom-Sort order

Image-7: Sort order options

This is another interesting tool available in Library module. As you see the screenshot, you have got many options to sort the photographs to select the photograph which you wish to.

Flag tool

The easiest way, to use this tool is to use the keyboard. Navigate the photographs through arrow keys and press “X” to set reject mark and press “P” to mark the photograph as selected. Pressing “U” will remove any flag marks from the photograph.

Star Rating

The star rating tool is easy to use via numeric keyboard. Press 1 to apply one star and press 5 to apply five star rating, zero to remove any star rating from the photograph. Simple tool but very helpful in classifying your photographs.

Tip: To reduce the star rating (for example 4 to 3) press [ square bracket. If you want to increase the rating, you can press ].

Colour Labels

You can have your own set of meaning to the colour labels as it does not come with any meaning by default. To set the colour labels, press 6, 7, 8 & 9 for Red, Yellow, Green, Blue respectively and Purple cannot be applied via any numbers/shortcuts.

Rotate buttons

This tool is also a straightforward tool. To see your portrait photographs in vertical mode (as it is supposed to be) this tool will come into use. To turn the photograph Counter Clockwise (Rotate left), you need to press the first button or the shortcut to do this is Ctrl+[.  To turn the photograph Clockwise, you can press the next rotate button or use the shortcut Ctrl +].

Tip – If you have set the display mode in camera itself, Lightroom will automatically do this.

Navigate buttons

This tool will do the same function as if you pressed the left & right arrow keys on your keyboard to navigate through the present folder/collection.

Play button

Clicking this tool will enable an Impromptu Slideshow with the photographs in the folder/collection. As you might expect, the slideshow will take up the whole screen to play the slideshow. Will come in handy when you have made a collection of final processed photographs from a shoot for client’s review.

Thumbnails

Drag this tool to your right-hand side to make the thumbnails bigger and drag it to left-hand side to make the thumbnail smaller. Alternatively you can press “+” symbol key to make the thumbnails bigger and “-” symbol key to make the thumbnails smaller.

Inverted triangle

This tool will enable you to select which tools you wish to be displayed on the toolbar; you can deselect few tools if you don’t want to see them on your toolbar.

Adobe Photoshop Lightroom-Library

Image-8: Customisations of the tools you want to see on the toolbar.

Tip: In Loupe view, the Opacity and the density of the grid lines can be changed by holding the Ctrl key, when the Grid is activated. You can increase/decrease the size of the grid and reduce/increase the opacity of the lines by mouse.

Library Toolbar in Lightroom

Image-9: Screenshot showing the image in Loupe view and Ctrl key Pressed & hold down to display the options. The options are marked in red colour.

This toolbar and all the tools on it are the ones which will help the photographer to sort, classify, select, order the 10’s of 1000’s of photographs into a proper understandable way, so that any point in future, he/she can get the photographs in no time from his/her Library. And that’s the reason I have said it as a most powerful toolbar in Lightroom.

Have I missed something here or do you think some other toolbar is much more powerful than the one we saw above? If so, put it in comments and let me know. Does this article helped you? do let me know in comments.

Cheers & Happy Photographing.

Subscribe to our blog by typing your mail id in the box below to receive our product notifications and offers on the same. Being our esteemed subscribers, you will be in our priority list to get to know about our upcoming stuffs related to photography – be it an e-book or trip or even photo walk. We ensure that you won’t get more than a single mail per week from us at the max; that’s our promise. We don’t sell your mail id as we respect you and your privacy as ours. 

Thanks for visiting. 

Advertisements
Colour spaces

Colour spaces in photography – An Introduction

In a simpler definition – A very defined space where exactly this many colours can be displayed/shown, by the device. In other words it is to determine one device’s ability to display the no. of the unique colours (sometimes a part of the device). Be it a computer screen, a mobile phone’s screen, or a tablet’s screen, most of the times it is hardware but in few cases, it is software (for instance – a browser).

sRGB – a colour space jointly created by HP and Microsoft. This profile is the most widely used one for browsers and most of the screens including tablet screens and mobile phone screens. As the below diagram depicts, the largest colour profile next to visually perceivable is ProPhoto RGB, the next smaller one is Adobe RGB and the smallest one is sRGB.

Since sRGB is the most used colour space in the browsers and alike in displays, you are expected to export your images in this colour space, so that the colour you have seen while editing are better displayed by the same file in the other mediums or displays.

Note: Not all the monitors available in the market possess the ability to display all the colours in sRGB. They usually measure it in percentage, for example – 75% of sRGB, 90% of sRGB. If you are a professional you might consider buying a monitor which covers a higher percentage of sRGB, mostly 90% + or even 90% + of Adobe RGB colour space. Dell ultra sharp series monitors have a positive feedback  in general.

A monk at Bylakuppe

Adobe RGB – as the name suggests created by Adobe systems and is smaller than ProPhoto RGB but larger than sRGB. Widely printers are using this profile, but it is advisable to check with the printing service provider before sending the files, in which colour space they need. Adobe RGB includes 50% of the colours specified by Lab Colour space.

Many printers and almost all commercial places most likely need the files in this colour space.

ProPhoto RGB – made by Apple, the largest colour profile available, but no devices support this profile yet. Hence if you export your file in this profile, the display medium will convert the file’s colour space into the device’s colour space in a best possible way! and it may show drastic colour differences. ProPhoto RGB includes 90% of all perceivable colours specified by Lab colour space. Currently there are no devices which support this profile. In future, there may.

Note: When you photograph, if you are shooting in RAW mode, you don’t have to worry about which color space to be selected in your camera, because RAW files are only interpreted by the softwares, basically the RAW files contains the data – it is not even a image format. But if you are shooting in jpeg, your color space selection does play an important role. Set Adobe RGB, if the purpose is to send photographs for print. If it is only for web services and display purposes, sRGB is sufficient.

Colorspaces explained

Colour spaces visually explained.  Image source – Wikipedia.

All the colour spaces are displayed over the visible colour space to have a better understanding.

If you are using Lightroom to edit your photographs, you do not have to worry about color space as Lightroom is working on the largest colour space ProPhoto RGB. The only place where you have to decide is when you are exporting your file from Lightroom.

Note: When exporting you can apply any of the above colour spaces to your photograph, the thing matters is the purpose of the photograph.

 

Hope I have made the basic understandings of the colour spaces currently being used. If you have got to say something about colours, comment it. Will be looking forward to it.

 

Cheers & Happy Photographing.

 

photo blog blog
photo blog blog

B & W in Lightroom.

Many of my friends did not believe the below Black & white photograph is worked and out from Lightroom. So thought of sharing the entire workflow pertains to this photograph and how I made this final photograph. My friends thought I had used Silver Efex, as I use to do it for some of my Black & White photographs. But in this case, I have entirely worked and exported the file from Lightroom alone.

Black & White in Lr

This is the final processed version of the photograph.

Let’s look at the “As shot” version of this very photograph.

SOOC

The Original RAW file, as it appears, less contrast and colours are not so favourable. If we convert it into Black & White, we can straight away add value to the image as the colours are not adding any value to the image.

I remember reading as Scott kelby said “Black & white Photograph is desaturating all the colours and boosting the contrast” and exactly that is what I have did here. How simple is the explanation which speaks at the best level of communication as far as B&W photograph is concerned.

B & W As shot

Histogram – As shot Image.

The histogram of the original image is self-explaining, less contrast (bell curve), bit underexposed too as the histogram is aligned towards the left hand side.

The first step to convert an image to Black & White in Lightroom is; From the Basic panel next to treatment, click Black & white as this converts the image into Black & White. Alternatively you can press “V” from Develop module which results the same. Now let’s fix the Exposure; for this image I have boosted it to 9/10th of 1 EV, in other words 0.90 EV. I seriously do not like to confuse people by using the exposure jargons, but here excuse me. Next boost the contrast to 100%. To boost the contrast, I have brought back the Highlights and shadows towards the negative side. I have also brought down the clarity to give the mood.

B & W Basic panel

The screenshot of the Lightroom Basic panel.

I have not made any manual corrections in the tone curve panel, except pushing the highlights and shadows towards its maximum range and selected strong contrast.

Tone curve panel

Screenshot of Tone curve panel.

Next in the B&W adjustment panel, to further boost the contrast, I have brought down the Green and red colour towards negative side by having a look at the Histogram. Just press “J” to enable the highlight and shadow clipping notification, so that the clipped portions (if) will be coloured in Blue and Red respectively. Kindly note that I did not clicked the Auto from the Black & White panel, it is fully manual process.

B & W

Screenshot of Black & White adjustment panel.

The next in Detail panel, I have made some little sharpening just to bring out the edges of the trees and noise correction been applied heavily to bring the mood as we did it in clarity slider. Detail slider purposely brought to the lowest as this photograph does not call for any details.

Balck & White in Lightroom.

Screenshot of Detail panel.

In the Lens correction panel, usual Lens profile corrections and chromatic aberration corrections are applied. Let’s look at the “After” Histogram.

Black & White in Lightroom

Screenshot of the Histogram “after” the conversion process.

As the Histogram shows, the tones are spread all over the range and a bit underexposed, the contrast is less too. It’s been kept particularly because “Expose to the Right” is not necessary for this photograph, as this nature of the photograph calls for a bit of underexpose and less contrast.

Trust this article helps you to make more beautiful Black & White photographs.

Angel

The power of Smart Previews in Lightroom.

When you create a smart preview in Lightroom while importing or after importing from menu, what exactly have been done by Lr?

Lightroom creates a lossy, small dng copy from the primary DNG or from the original RAW file. The size of the file could be in the range of 1-3 Megabytes and the longer side of the smart preview file is 2540 px. Imagine you have raw file ranging from 25 megabytes to 35 megabytes and it is duplicated smartly to a much smaller size. The smart preview file been saved inside the Lightroom catalog itself, along with the instructions you might apply while developing. As the name denotes, this is one of the smartest ways of working with Lr. Keep your primary/original raw files in external HDD and create smart previews while importing it into Lr.

What are the advantages in working with smart previews?

  • Your Lr suddenly starts working in blazing fast, since it needs to deal with a small file.
  • For developing and exporting, you don’t have to connect your external HDD/NAS drive for small-sized exports. All the exports can be  done from the dng file itself as long as the longer edge is kept not more than 2540 px. Or in other words, to print till 5” * 7” size.
  • A lot of HDD space savings in your computer, especially when you are working in a laptop with SSD.
  • You are always having a copy of all your photographs with you in the form of smart previews. When you meet a potential client, you are always ready for an instant slide show of your work (provided you have done some base work with the intention so, like keywords). Assuming you are using a laptop, if it is a Desktop/Mac the question does not arise at all.

Other things to note with regards to smart previews

For full-sized export or larger than 2540px, you need to connect your external drive / NAS.

  • All the metadata and develop settings are updated with your original file as soon as you connect your external drive.
  • The file details are displayed below Histogram, whether you are working with the Smart preview or with Original file or with both.
  • Smart preview-Lr
  • Purely Photography
  • If you do not need smart previews which you have created earlier, you can discard it. To do the same, just click the small rectangle symbol below Histogram. In the dialog box which pops out, click discard smart previews.
  • When you are working in Library module – Whether the file is an original or smart preview can be seen in the film strip or from the grid view, looking at the right top of the grid cell. A small filled rectangle with dotted line on its periphery will be displayed if it is a smart preview.
  • PurelyPhotography
  • If you wish to edit your images further in other apps like Photoshop, Silver Efex, or any other external apps, you need to connect your HDD as it is required to create a separate psd, tiff or jpeg file to work with.

 

My latest way of working in Lightroom:

  • Copy the RAW files from the camera’s memory card to Desktop. (Format the memory card in camera before the next shoot)
  • View the RAW files via Faststone viewer (free version) and delete the unwanted ones. Further discarding will be from Library module by simple flagging and unflagging method.
  • Make a copy of the folder to the external HDD’s Lightroom folder [this folder is a primary organised one and linked with Lightroom catalog. Lightroom → 2014 → November → (Shoot name)] and cut paste the folder from desktop to the backup drive.
  • Fire up Lightroom and start the import process [Just Add the folder to the catalog with 1:1 preview and smart preview creation].

Cheers & Happy Photographing.

© Copyright

Plagiarism has been common throughout the world since time immemorial, and more so in today’s digital era and even more so in the field of photography. There have been instances of image theft and usage of images without credit to the photographer. The magnanimity of this issue is the reason for my writing about this in detail. Though I’m no expert in the field of copyright etc, have spent some quality time researching about this before writing this.

Best coffee

Watermarking is the first step towards owning a piece of art you have created. In visual terms, how effectively you place the watermark is what matters most of the times. Having said that putting a standard watermark is not advisable, since one colour, size & position may not fit all of your images. Customizing the watermarks to match a particular image is the solution to this and this can be done using Lightroom quite easily. I’ll talk about the “how’s” in a later topic.

Watermarking & copyrighting ensures certain minimum safeguards of the rights of authors over their creations, thereby protecting and rewarding creativity. A detailed article from dPs on how to handle image theft can be read here.

The definition of Copyright is a right given by the law to creators of literary, dramatic, musical and artistic works and producers of films and sound recordings. In fact, it is a bundle of rights including, inter alia, rights of reproduction, communication to the public, adaptation and translation of the work. There could be slight variations in the composition of the rights depending on the work.

Shringeri, Divinity

a. The primary thing in watermarking your image with copyright symbol is that you do not have to register for putting the copyright symbol.  If the work is created by you, you have the full rights (automatically) to put your watermark with the Copyright symbol on your work. The work here refers to any form of art viz., a piece of music you have created, a small video you have took, a painting that you made or a photograph.

b. Copyright protects the rights of the author i.e., creator.

c. Copyright can be assigned to anyone by the author.

d. Registering your copyrights has some advantage. Check with your country’s copyright law to get some clarity. In general, however, certificate of registration of copyright and the entries made therein serve as prima facie evidence in a court of law with reference to dispute relating to ownership of copyright.

e. If you want to register your work, each and every work needs to be registered separately.

f. Copyright generally has time limits.

g. There is no such thing as “International copyright” that can protect the author’s work throughout the world. However most countries do offer protection to foreign works under certain conditions, and these conditions have been greatly simplified by international copyright treaties and conventions.

The above points are generalized, check with your country’s copyright law for specific details. The bottom-line is to watermark all your images. A good story for you to read here.

If you have a story to share about copyright issues or you have a good idea about copyrights do share in the comments section.

Cheers and happy photographing.

Loving Landscapes – A review

Are you new to photography? Do you roam around everywhere with your camera equipment to get that one amazing looking landscape photo? Are you disappointed about the fact that your photos aren’t that compelling enough? Well, to begin with, watch this TED talk video by Angela Lee Duckworth. She clearly states the fact that the key to success is not in the IQ or good looks or talents. It is the grit, the perseverance, the passion for long term goals and the willingness to start over again upon a probable failure. Before going ahead, please watch the video.

 A few weeks ago, while browsing through dPS, I bumped into this e-book which was dedicated to Landscape photography. It was quite intriguing to find a book which focussed only on one particular genre. I went on to read the book with a notion that the photographic idea in the book can be applied according to one’s perception on one’s style of photography. The contents page of the book clearly stated that the book is strictly for landscape photography but with a good understanding, one can apply the concepts to other genres of photography.

The book starts with a clear introduction and it speaks about what is covered in the book and what is not too. The entire book is divided into 12 chapters. The first chapter covers the basics of image capturing and attributes which play an important role in getting the right exposure in a given situation and in attaining an optimum sharpness for a decent landscape photograph. It also touches upon the negatives of a higher ISO, White Balance, Histograms and Focusing. The above attributes have been touched upon in a simple way, in a way not to confuse the readers with extremely technical terminologies.

 The second chapter is “Computers and backups” and this chapter deals with techniques that Sarah and Todd follow in their studios and is pretty straight forward. This topic is by far the most discussed on the internet and one of the most important in this era of digital photography. The next chapter talks about the power of RAW and why it is important to shoot in RAW format, every time! I have covered this topic in an earlier blog and you can check that out here!

 The fourth covers File management and using Lightroom to organize images. This chapter is very useful for those who would like to keep tab on their huge collection of images with ease. The uses of key wording are dealt with in detail along with the advanced search techniques in Lightroom which enables searching of images using the multiple filters. This chapter also explains about the collections and smart collections in Library module and how it works to help you finding the image you are looking for.

Todd

The sixth and seventh chapters explain about the export option in Lightroom which lets you export your image to different social media platforms like flickr or your own website. This chapters emphasize on the develop module’s functions and on how the sliders can be used to enhance your photograph by adjusting the exposure, opening up the shadows, bringing out the colours, enhancing the colours from the raw data your camera has recorded on field.

In the next chapter Sarah explains her work flow in detail. She starts with explaining the crop tool, goes on to the dust removal, applying sharpness, removing Chromatic aberration and also touches upon the basic panel adjustments. The importance of following the mentioned order during post production is explained clearly in the book. All the necessary tools in the develop module are touched upon in this chapter.

Chapter nine talks about the other tools in develop module. The noise corrections panel, HSL panel, Split toning panel, Effects panel and a few other local correction tools in develop module are explained in detail. The uses of these tools and they can be used to enhance the photograph is explained clearly.

Chapter ten touches upon some camera techniques which can be used in creating some effects, namely Photo impressionism, Camera spin and techniques on how to photograph the Milky Way in detail. The next chapter goes on to explain the use of Photoshop for landscape photography. All the important panels and necessary basic tools are explained clearly. Lightroom and photoshop has been explained in such ways that even a first timer (I mean it) can follow and get the results as in the book. The last chapter talks about the Multi exposure workflow in Photoshop, explaining the tools which are required for taking multi exposure photographs, like star trails, light paintings and HDR.

Overall, the book is neatly presented with appropriate screen shots wherever necessary. The photographs used in the books are available along with the book and lets you try what’s being explained while reading, this makes the book a practical guide. Open the e-book along with Lightroom and Photoshop to make this a worthwhile exercise. If you want to enhance your skills in landscape photography you might have to get this book immediately.

Cheers, Happy Photographing. 🙂

 

The power of Alphabets in Lr 5


Not having any specific title, but the intention is to post one article today. After some amount of nail biting, decided to write about the most helpful list of shortcuts in Lr. Despite the amount of information spread across the internet in out of seconds of googling and a dedicated Lightroom shortcut display in each module in just one click (Ctrl + ‘), the smart list of keyboard shortcuts is still a scarce. Here is one, which you will use it day in and day out for sure.
 
I have maintained no order with respect to either the modules or the list of tools/functions. The only thing I kept in mind is the one which we will use often. The pdf file of the same can be easily downloaded, the link is at the bottom of this article.

R – Crop tool

     O – after pressing “R” will displays the rules of composition overlay in cyclic mode
     Shift + O – will make different versions of the current compositional overlay
     X – Rotate crop
     Pressing Ctrl will activates the level tool
G – Grid view in Library module
D – Develop module
E – Loupe mode in library module
P – Set select flag
X – Set reject flag
U – Unflag
J – Highlights and Blacks clipping
F – Full screen view
T – Display Tool bar
V – Convert the current image to B & W, press again to back
Q – Activates Spot removal tool
M – Activate graduated filter tool
L  – Lights dim/Out in cyclic mode
W – Activates White balance selection tool
K – Activates Adjustment brush tool
     O – Show/Hide paint overlay
     H – Show/Hide adjustment pins
     [ – Make your brush size smaller
     ] – Make your brush size bigger
     A – after pressing “K” for auto mask on & off
Y – View before and after side by side
     Alt + Y – View before and after up and down
C – Compare mode
N – survey mode
Z – Zoom view
Library
Ctrl + Alt + A – Select all flagged
Ctrl + Shift + E – Export window opens up
Ctrl + Shift + I – Import window opens up
Ctrl + D – Select none
Ctrl + A – Select all
Ctrl + , – Create virtual copy
Ctrl + ‘ – Display the key board short cuts pertains to the particular module
Ctrl + L – Library filters on
Ctrl + U – Auto tone
Ctrl + Shit + U – Auto White balance
Ctrl + Backspace – Delete all rejected flagged photographs (a dialog box will open up and ask whether to delete the images or just remove them from the catalog)
Ctrl + S – Save metadata to file
Tab – Hide side panels
Shift + Tab – Hide all panels
Backslash (\) in Library module – Library filter bar on & off
Backslash (\) in Develop module – before view
(/) Slash in develop module – deselect active photo
Develop
Shift + F – Full screen working space cyclic
Shift + M – Activates radial filter
0 – No star ratings
1-5 – respective 1 star to 5 star rating
6-9 – colour labeling
F5 – Show Module picker
F6 – Show Film strip
F7 – Show Left module
F8 – Show Right module
= = Increase grid size
– = Decrease grid size
Hope this article helps to save your valuable time and the pdf file can be downloaded by clicking here. If you have got any other smart shortcuts, share it in the comments section.
Cheers and Happy photographing. 🙂

Ultraaaa wide

Recently I have been commissioned for to shoot for a dental hospital. It has surgical facility and all the associated laboratory facilities. Any person coming to the hospital with a dental problem can get all his needs attended to under a single roof.

To get on to the theme of this topic, this type of indoor shoot sessions need to be preplanned and made execution-ready with a certain thoroughness and seriousness. This would apply to all shoots that need to backed by a weighty commitment. I fixed an appointment with the client a week ahead, to firm up on the schedule and locations of the shoot. I also had a long discussion with the client about how they want the photographs, and for what purpose they want, in an attempt to understand what are their intentions/ideas are and the use the photographs are going to be put to. I came to know during the conversation that they are putting up a website to show to the world the facilities/competencies they have. It was, at this point of time, important to understand the level of lighting that needs to be maintained at the time of the shoot session. The choice/trade-off was between using auxiliary/sophisticated lighting at extra cost or use existing lighting/minimal equipment and bring out the best possible pictures under the circumstances. Needless to say, the customer wants pictures that would be used in a marketing showcase, be it in digital form or print form(web, brochures etc.).

I surmised that the shoot can be done only by ultra-ultra wide lenses and I selected Canon 16-35mm f2.8 L II as my boy along with Canon EOS 5D M III as my recorder and Canon 50mm prime f1.8 for few portraits of the staffs. This shoot is not really an artistic portrait, you don’t have to look out for exotic views or angles as the photographs are meant for the general public (patients too). Simplicity and neatness are the key elements.

Simplicity

During the shoot I stick with one rule “Either keep the room’s vertical lines parallel with the vertical lines in the frame or horizontal lines in the room parallel with horizontal lines in the frame, if possible keep both. But definitely not without either, which will make something extraordinary or ugly. Even when you shoot this cautiously you will end up with a  noticeable amount of both barrel and pincushion distortions .

Lightroom comes in to rid the pictures of all the distortions and it does automatically if you select Auto for most of the lenses. Manual intervention is required for all the ultra-ultra wide lenses for manual correction might be necessary because automatic correction based on lens profiles are not very accurate when distortion levels are too high.  It is necessary to be careful while making corrections for distortions. You have to careful while correcting though.

Both of the photographs here have been corrected in Lightroom. Here is a quick peek into Lr Lens Corrections. The Lens correction panel has been further divided in to Profile, colour and Manual. The first sub panel “Basic” is the front control of the next two panels. If you check the check box all the auto correction will be applied by Lr. Even after the auto corrections, if you feel to fine tune it you have to click the respective panels. When shooting jpeg some older cameras might not provide lens information in the image file and in such cases we have to remember the lens used and later choose it in Lightroom’s Profile subpanel,  if it is present there and then Lightroom will apply the relevant corrections to the image.

Neatness

If you are not satisfied with the Lr’s Chromatic Aberration correction, you can do it manually by clicking the eye dropper directly on the image where the CA appears. You can easily find it out by viewing the image on 1:1 and for further fine tuning there are sliders. Finally the manual adjustments for lens distortion correction. The distortion slider fixes the pincushion distortion if you move the slider towards left, it fixes the barrel distortion if you move towards the right side. The vertical and horizontal slider fixes or adjusts any vertical/horizontal perspective correction if any, you wish. Rotate slider is to use it for any level correction or slight distortion too. Scale slider is to either stretch out or to squeeze in the image for any reason which may be because of the distortion correction you have applied or too much of perspective correction applied. Aspect slider is to enlarge or squeeze the image in one axis for some creative purposes and can be useful to fix images from certain heavily distorting lenses that stretches the image along one axis causing it to look skewed. Finally Constrain crop, I keep it checked all the time, so you don’t need to see the portion which is not going to be part of the photograph due to the corrections being applied. On a lighter note once the “Constrain crop” is checked here, the “Constrain to Warp” in crop tool is also being checked automatically.

It is not advisable to use the vignette here and I don’t use for the following reasons – a. The controls here are minimal – only Amount & Midpoint, these controls are  required to eliminate only the vignetting produced by the lens,  and so it is not very flexible when we want to create artistic vignetting effects b. If you have cropped the photograph and you have applied some vignette, you are not going to get the full result rather you might get some unimaginable result, because the vignette you apply here is for the full image, it won’t consider the crop you have made via crop tool.  I suggest you to use the Effects panel and use post crop vignette where you have more controls.

Heading back to Lens corrections in the Basic sub-panel at the lower level there are Level, Vertical, Full, Auto and off options. They are to correct the perspective corrections which I am not using because of following reason – I do my crop as my first correction in the develop module, while I crop I have to do the level corrections and if any perspective issue I switch to the Manual section in Lens correction panel as for the above photographs. So I am in no need to use the auto function, but I have heard from my friends that Auto does a neat job in most cases.

If you are interested in reading more about CA click here and have you heard about mustache / complex distortion or if you want to read more about distortion click here and write your thoughts in the comments section.

Cheers, Happy photographing.

“R” in Lr.

♦  The moment you Press ‘R’ from whichever the module you may be in Lightroom, you will be taken to develop module with crop tool activated, and the “rule of thirds” overlaid on your image. Check the screenshot Fig – 01 below.

ImageFig – 01 Crop tool activated and Rule of thirds overlaid on your image.

♦  Now it is your turn to select an aspect ratio and give a try. Select an aspect ratio from the drop down menu in the crop tool bar (the tool bar works on demand based, you can’t see unless you activate the crop tool), once you selected the aspect ratio the size of overlay will change on the image. Now drag the overlay as you wish – towards your right, left, up or down – literally recompose your shot by placing the overlay in relation with the prime subject in the photograph. Press enter or click close or press ‘R’ once you are done. Check the screenshot Fig – 02 below.

ImageFig – 02 Aspect ratio selected as 1 × 1 and encircled in red.

And note the remaining portion apart from the potential image area is dim already, which makes decision-making as an easy one.

♦  How about adjusting your image to perfect horizon or to perfect vertical.! There are two options to do it in Lr, either by clicking the spirit level symbol in the tool bar, click the spirit level (encircled in the screenshot Fig – 03) and draw a straight line on the horizon or when the crop tool is active, keep the cursor out from the image area and drag up and down, there will be more grid lines overlaid (which will act as reference lines) as you move the cursor and you will be in a better position to evaluate your image to make it perfectly horizontal or vertical.

Image

Fig – 03 Spirit level tool encircled in red.

♦  Want to make a free form crop, with your own aspect ratio !. Click the lock symbol to unlock and to make it free form, drag your cursor inside the image area from one top corner to another diagonally opposite corner to make your own crop. Check screenshot Fig – 04

Image Fig – 04 Lock symbol encircled.

♦  When you make lens profile corrections, possibilities are there to include the corrected portion (the edges mostly). To avoid that click constrain to warp, as in the screenshot. Once you make constrain to warp on, the image will be cropped after the correction or it can be applied alternatively in the lens correction panel also. Check screenshot Fig – 05

ImageFig – 05 with Constrain to Warp check box encircled.

Here is the most interesting part in this tool.
♦  Want to see how your image will look according to different compositional rules, Lightroom comes very handy here. Your crop tool is activated by pressing “R” and the rule of thirds is overlaid, at this juncture press “O” and watch the image area, the different compositional rules will be overlaid as you press “O” repeatedly. These options are in Lr to make your photograph a much better than you thought while clicking the shutter. Look at the screenshots below.

ImageFig – 06 Screenshot with diagonal rule of composition overlaid

ImageFig – 07 Screenshot with Rule of triangle overlaid.

Image

Fig 7-a. Screenshot with Rule of triangle applied in a reverse manner (read further below on how to activate that).

ImageFig – 08 Screenshot with Golden rule overlaid

ImageFig – 09 Golden spiral rule overlaid.

There are total five no. of rules can be displayed and applied to your photograph in Lightroom.

a. Rule of thirds

b. Diagonal rule of composition

c. The golden triangle

d. Golden ratio

e. Golden spiral

Out of these five rules “The golden triangle” and “Golden spiral” can have a different versions like in Fig – 7.a, which can be activated by pressing and holding Shift along with press “O”. You can do the same for Golden spiral rule too, it has more versions. Check out and comment below, what do you feel about that.

I wish Adobe Lightroom add “Rebatment of rectangle” too in to the rules list in their further releases, it is also interesting one. The light intensity of the rule lines can be controlled by pressing and holding “Ctrl” key. Apply the rules together with different aspect ratios, the options are too many to make a better photograph.

Cheers. Hope you enjoyed this article. If so share it with your friends, they might also like as you did.